Computer Repair

How to Change iMac Hard Drives

How to Change iMac Hard Drives

Switching iMac Hard Drives to SSDs: A step-by-step guide to improving your computer's performance

Replace iMac hard drive can be an effective way to improve its performance and storage capacity. Before you begin, make sure you have the equipment in the right position and the necessary tools at hand. Opening the screen will require the use of an opening tool and the careful insertion of a plastic card to avoid damaging the internal cables.

In addition, it is advisable to backing up of the operating system before making the change. Then, select the new hard disk, remove the old one and perform the installation correctly. Once this is done, close the screen and test to make sure everything is working properly. You can also take the opportunity to upgrade your RAM, as well as clean the inside of your iMac.

Switch iMac hard drive for an SSD


Step 1: Backing up the operating system

Cloning the hard disk to the new SSD

First, a hard disk cloningConnecting the new SSD disk via USB so as not to open the iMac for the moment, and checking that everything is OK, once the copy of the information on the disk is finished (patience, it can take several hours), we proceed to change the disk.

How to Replace iMac Hard Drive with SSD

Before replace iMac hard driveis essential to carry out a operating system backup to ensure the integrity of your data. Here's how to do it:

  • Connect an external storage device, such as a hard drive or USB drive, to your iMac.
  • Open the application "Time Machine"on your iMac.
  • Follow the instructions to configure and select the external device as the backup destination.
  • Click "Back up now" to start the backup process.
  • Wait for Time Machine to finish the backup. Note that the time required may vary depending on the size of your data.
  • Once the backup is complete, verify that the backup was successful and that all your files are present on the external device.

Change iMac Hard Disk - Perform Disk Cloning

Backing up your operating system will allow you to restore all your data in the event of a problem during the process of replace iMac hard drive. Remember to follow each step with caution and make sure your files are properly backed up before proceeding to the next step.

Step 2: Preparations before replacing the hard disk drive

Before carrying out the replacing the hard drive in your iMacIf the iMac is to be installed, it is important to make the necessary preparations to ensure a correct and safe process. At this initial stage, you will need to consider three main aspects: the correct positioning of the iMac and the availability of the necessary tools.

Position the iMac properly

Be sure to position the iMac in a suitable position before you start the replace iMac hard drive. It is recommended that the iMac be placed face up on a spacious and stable table. This will allow better access to the internal components and prevent possible damage during the procedure.

Necessary tools

It is also essential to have the appropriate tools to carry out the hard disk replacement effectively. Some of the tools you may need include an opening tool to make it easier to open the screen and a plastic card to insert between the screen and the frame, thus avoiding possible damage to cables or internal components.

Step 3: Opening the screen

The opening the screen on an iMac is a crucial step in replacing the hard disk. Here are the steps to follow:

Change iMac Hard Disk - Open Screen

Use of opening tool

To open the screen easily, we recommend using suction cups. This tool will help release the retaining tabs and prevent damage to cables or internal iMac components. Be sure to apply gentle but firm pressure to separate the screen from the frame.

Plastic card insertion

Once the screen is slightly separated from the frame, a plastic card should be inserted between the screen and the frame. The plastic card will act as a gentle lever to completely separate the screen. It is important to be careful not to apply too much force and damage internal cables or components.

Remember that this step requires patience and precision. Take the time to perform these steps safely and meticulously.

When we remove the glass, we can see that there are a lot of specks of dust on the LCD, which we remove with a cloth.

Change iMac Hard Disk Drive - Clean LCD Dust

Once removed, the TORX 8 screws we carefully separate the 4 connectors on the screen, the upper V-sync connector, the power connector at the bottom left, the temperature sensor and the image sensor itself.

Change iMac Hard Disk Drive - Disconnecting cabling

in this case we see that it has a lot of internal dust.

Continue to the next step to replace iMac hard drive and improve its performance and storage capacity!

Step 4: Replace iMac hard drive

For changing the hard drive in your iMacIf you are not sure how to do this, you will need to follow a series of steps carefully. Below, we explain how to do this:

Selecting the right hard disk

Before initiating change, it is important to selecting an iMac-compatible hard drive. Be sure to choose a storage drive with sufficient capacity and that matches the specifications of your iMac model.

Removing the old disc

Once you've selected the new drive, the next step is to remove the old hard drive from your iMac. To do this, open the iMac enclosure according to the manufacturer's instructions and disconnect the cables that connect it to the motherboard. Be careful not to damage any components during this process.

We see the hard disk which is the part to be replaced, we remove it by removing the upper screws with TORX 8 and disconnecting it.

Change iMac Hard Drive - Unplug old drive

Installing the new hard disk

Once you have removed the old disc, proceed to installing the new hard drive in your iMac. Connect the cables properly and place the hard disk in its place according to the manufacturer's instructions. Make sure that the disk is properly secured to prevent undue movement.

We proceed to the iMac interior cleaningThey are usually very dirty due to wear and tear. With compressed air we proceed to a complete cleaning of the machine.

Change iMac Hard Drive - Internal Cleaning

Once you have completed the process of replace iMac hard driveSeal the iMac's screen and perform the necessary tests to ensure that the new hard drive is working properly.

Step 5: Closing the screen and testing

Once you've installed the new hard drive in your iMac, it's time to close the display and run some tests to make sure everything is working properly.

Change iMac Hard Disk - Shut down iMac

  • Closing the screen: Carefully place the display back in its original position, making sure to align the edges correctly. Make sure not to damage the internal cables during this process.
  • Functional tests: Turn on your iMac and verify that the operating system boots up smoothly. Check overall performance and make sure the new hard drive is working properly. You can copy some large files to evaluate the data transfer rate.

If everything is working properly and you're satisfied with the performance of your iMac, congratulations, you've successfully completed the replace iMac hard drive. Now, enjoy your increased storage capacity and better performance on your device.

Repair options and additional changes

For more specific problems with your iMac, there are additional repair and replacement options to consider:

Repair of motherboard

If your iMac has a faulty motherboard, you may need a specialised repair. This involves inspecting and possibly replacing faulty components to restore optimal performance.

Screen replacement

If your iMac screen is damaged or faulty, it can be replaced. This involves installing a new screen to ensure a clear, trouble-free display.

RAM memory expansion

If you need to improve the performance and processing power of your iMac, one recommended option is to upgrade your iMac's RAM. This involves installing additional memory modules to increase your computer's capacity.

Installing MacOS

If you want to upgrade your operating system to the latest version of macOS, you can perform the corresponding installation. This involves following the steps to download and install the system update on your iMac.

These additional options allow you to address specific issues and enhance the functionality of your iMac in a customised and efficient manner.

Final considerations and recommendations

Once the process of replace the hard drive in your iMacIn order to ensure that the information is not misleading, it is important to bear in mind some considerations and recommendations:

  • Make a regular backup of your important data to avoid any loss.
  • Select the right hard drive for your needs, taking into account storage capacity and data transfer speed.
  • Verify that the new hard disk is correctly installed and working properly before closing the screen.
  • If you have any doubts or difficulties during the process, it is advisable to consult the manufacturer's documentation or seek specialist advice.
  • Keep your operating system up to date and regularly monitor your iMac's performance to detect any problems.
  • Consider purchasing a solid state drive (SSD) to further improve the speed and fluidity of your computer.
  • You can also take advantage of the services offered by Computer Repairsuch as RAM and hard disk upgrades, motherboard repairs, installation of MacOs operating system.
  • Remember that newer iMac models, such as the 27 5k from 2020-2022, have the hard drive soldered to the main board and cannot be replaced.

You may be interested in...

Scroll to Top